6S 1300mAh 100C HV LiPo Battery — FPV Racing Pack

A high-voltage (HV) 6S lithium polymer battery purpose-built for 5-inch FPV freestyle and racing quadcopters. The 1300mAh capacity hits the optimal balance point for 5-inch builds: enough energy for 4–6 minutes of hard flying, light enough that the quad's thrust-to-weight ratio stays above 2:1. The 100C continuous discharge rating ensures the cells can deliver peak current without voltage sag that would otherwise cause desync or power cutouts in hard manoeuvres.

High-voltage (4.35V/cell) chemistry increases usable capacity by approximately 8% compared to standard 4.2V LiPo chemistry. Charged with any balance charger set to HV LiPo or LiHV profile. XT60 connector is the standard for 5-inch quads and all ISDT, Hota, and Junsi chargers.

• Configuration: 6S1P (22.2V nominal, 25.2V HV full)
• Capacity: 1300mAh
• C-rating: 100C continuous, 200C burst
• Chemistry: high-voltage LiPo (LiHV, 4.35V/cell max)
• Connector: XT60
• Balance connector: JST-XH 6S
• Weight: approximately 215g
• Dimensions: approximately 70×38×35mm

Warning: LiPo batteries require proper handling, storage, and charging procedures. Never charge unattended. Use a LiPo-safe bag for charging and storage.